Alinco DX-SR8 - Parameter Setting Mode (Set Mode); List of Setting Mode Parameters; How to Use the Parameter Setting Mode

68
Chapter 5 Special Functions
DIAL LOCK Function
This function locks the main tuning dial to prevent accidental frequency changes.
NOTE: This function is useful in mobile operation where the main tuning dial may be rotated by
car vibrations, etc. While this function is activated, tuning is still possible with the [c/
d
]
keys and RIT control knob.
Procedure
1.
Press the [ ] key.
will appear.
• To cancel this function, press the [
] key
again.
KEY LOCK Function
Key lock function blocks operations of the main dial and most of other key operations.
In the Key-lock status, only the following operations are permitted other than the Power
ON/OFF and the [FUNC] key operation.
[Functions permitted during the Key-lock]
• PTT • AF level • Squelch level • IF shift • RIT/TXIT (if activated in advance)
Press the [FUNC] key, then press the [
1.
]
key.
2.
will fl ash.
• To cancel this function, press the [FUNC]
key, then press the [
] key again.