Alinco DX-SR8 - PTT Key Lock Function; Auto Power OFF (APO) Function

80
Chapter 6 Parameter Setting Mode (Set mode)
• AT (AUTO)
The delay time for the SEMI BREAK-IN mode will be set automatically according to the
code speed being transmitted.
• 1 to 7
Select the desired delay time for the SEMI BREAK-IN mode (“1” is the shortest, and ‘’7”
is the longest).
• FL (FULL)
The FULL BREAK-IN mode.
Menu 17. Key ratio
This menu sets the CW key ratio (or weight).
1.
Default range is [RAT-3.0].
You can change the Key ratio as below by
2.
rotating the main dial.
RAT-2.5 RAT-4.0 RAT-4.5RAT-3.5RAT-3.0