Alinco DX-SR8 - Page 97

95
Appendix
Parameter Setting Mode
Menu Default display Function
00
SSB-0.1
Frequency Step of the S/T Keys SettingAM-1.0
FM-2.5
01 PROT-OF Memory Overwrite Protection
02 ACCS-ON Memory Frequency Access Protection
03 SC- 2S Timer SCAN Setting
04 B-SCAN Select Scan types
05 SSC-50 Search range setting for Search scan
06 SKIP Memory scan skip Setting
07 DIMR-32 Dimmer
08 BEEP-ON Beep Sound
09 U/L-ON Automatic USB / LSB Selection
10 AGC-ON Automatic AGC-S / AGC-F Selection
11 TXIT-ON TXIT Function Setting
12 EKEY-ON Electronic Keyer Setting
13 WPM-20 Electronic Keyer Speed Setting
14 PADDL-N Electronic Keyer Reverse Setting
15 ST-800 Sidetone (CW Offset) Setting
16 BKIN-AT Break-in Delay Time for CW operation
17 RAT-3.0 Key ratio
18 T-88.5 CTCSS Tone Encoding Setting
19 SPH-OFF Speech Compressor
20 PTT.L-OF PTT Key Lock
21 APO-OFF APO-Auto Power OFF
22 UD-RPT UP/DOWN keys function setting
23 FUNC-MN FUNC key resume timing setting
TUNE
SPLIT
H/L/SL
PRIORITY
NB
UT/LT
AGC-S/F
Key Lock
(7M) (10M) (14M)
(21M)(18M) (24M)
(28M)
±∆f
*Tx Moni
*VFO A=B
MW
(1.9M) (3.5M) (5.3M)
M Erase
Quick Reference of control keys
NAR
SCAN
SHIFT
TONE
NAME
*Set Mode
M→V
BANK
MF SET
*Press and hold for 1 second.
Quick references of keys and parameters
setting mode.
* You may make copies of this page, cut
the charts and carry them with the unit for
your references.