Publication 1756-UM523F-EN-P - December 2006
108 Maintain and Troubleshoot the System
4. Make sure that each node has a valid keeper signature.
5. Choose Close.
Edit Sessions in Progress
To see if a computer is stopping the secondary chassis from
synchronizing, you must see if an edit session is in progress.
To edit sessions in progress, perform this procedure when a
secondary chassis will not synchronize and the CNB modules in the
secondary chassis show CMPT.
Actions
If the Valid Keeper column shows Then
Yes The node has a valid keeper signature.
No Select the node and choose Update Keeper.
Secondary Chassis
42797
CMPT
Action Details
1. Open the SRM configuration tool for the
primary chassis.
A. Start RSLinx software.
B. From the Communications menu, choose RSWho.
C. Open the branches of your network until you find the 1757-SRM module in the primary
chassis.
D. Right-click the SRM and choose Module Configuration.
To Next Page
Loading...
