Allen-Bradley 1756-CNB - Replacing Local I;O Tags and Aliases

Publication 1756-UM523F-EN-P - December 2006
166 Convert an Existing System to Redundancy
This example shows the results of replacing Local with chassis_c.
Replace Any Aliases to Local I/O Tags
Are any tags aliases for I/O devices that were previously in a local
chassis?
1. From the L
ogic menu, choose Edit Tags.
2. Press the Ctrl + H keys (replace).
EXAMPLE
Replacing Local with chassis_c...
Searching through MainProgram - MainRoutine...
Replaced: Rung 0, XIC, Operand 0: XIC(Local:16:I.Data.0)
Replaced: Rung 0, OTE, Operand 0: OTE(Local:2:O.Data.0)
Replaced: Rung 1, XIC, Operand 0: XIC(Local:16:I.Data.1)
Replaced: Rung 1, OTE, Operand 0: OTE(Local:2:O.Data.1)
Replaced: Rung 2, XIC, Operand 0: XIC(Local:16:I.Data.2)
Replaced: Rung 2, OTE, Operand 0: OTE(Local:2:O.Data.2)
Replaced: Rung 8, OTE, Operand 0: OTE(Local:15:O.CommandRegister.Run)
Complete - 7 occurrence(s) found, 7 occurrence(s) replaced.
If Then
Yes Go to step 1.
No Skip this procedure.