Publication 1756-UM523F-EN-P - December 2006
Configure the System Redundancy Module 63
Actions
Action Details
1. Open the SRM configuration tool for the
primary chassis.
A. Start RSLinx software.
B. From the Communications menu, choose RSWho.
C. Open all the network branches to find the 1757-SRM module in the primary chassis.
D. Right-click the SRM and choose Module Configuration.
2. Set the program control option. A. Click Configuration.
B. Do you want to let a controller send a message to the SRM?
• Yes — Check the Enable User Program Control check box.
• No — Uncheck the Enable User Program Control check box.
C. Choose Apply and then Yes to continue.
D. Choose OK.
To Next Page
Loading...
