Allen-Bradley 1756-CNB - System Optimization and Resource Management

Publication 1756-UM523F-EN-P - December 2006
118 Maintain and Troubleshoot the System
Manually Synchronize the
Chassis
After a switchover, you may have to manually synchronize the chassis
because either:
• the Auto-Synchronization option is not set to Always or
• the chassis failed to synchronize.
To manually synchronize the chassis, perform this procedure.
1. Display RSLinx software.
2. From the Communications menu, choose RSWho.
3. Expand the network until you see the 1757-SRM module in the
primary chassis.
4. Right-click the 1757-SRM module and select
Module Configuration.
5. Click Synchronization.
Workstation
Linx Gateways, Ethernet
AB_KTC-x, ControlNet
n, 1756-CNB/D/E
Backplane, 1756-Ax
xx, 1756 module, 1757-SRM
−
+
−
−
−
6