Publication 1756-UM523F-EN-P - December 2006
110 Maintain and Troubleshoot the System
Before You Begin
The SRM clock is accurate only if you:
• initially set it after you installed your system.
• reset it after any power loss to both chassis.
Actions
Action Details
1. Open the SRM configuration tool for the
primary chassis.
A. Start RSLinx software.
B. From the Communications menu, choose RSWho.
C. Open the network branches until you find the 1757-SRM module in the primary chassis.
D. Right-click the SRM and choose Module Configuration.
2. Go to the event log. Click Event Log.
To Next Page
Loading...
