Publication 1756-UM523F-EN-P - December 2006
134 Update Modules and Redundant Systems
8. Reset the secondary CNB modules. A. Cycle power to the secondary chassis.
B. On the Synchronization Status tab of the configuration tool, verify that the modules
show full compatibility.
9. Synchronize the secondary chassis. A. Click Synchronization.
B. Click Synchronize Secondary and then Yes.
C. Wait for the chassis to synchronize.
10. Initiate a switchover.
Click Initiate Switchover and Yes.
11. Replace the CNB modules in the new
secondary chassis.
Repeat steps 6-8 for the CNB modules in the new secondary chassis.
Action Details
The chassis are synchronized.
To Next Page
Loading...
