Publication 1766-RM001A-EN-P - October 2008
428 Communications Instructions
integer file starting at word N7:0. If 15 seconds elapse before the message
completes, error bit MG11:0/ER is set, indicating that the message timed
out.
Valid File Type Combinations
Valid transfers between file types are shown below for MicroLogix
messaging:
Local Data Types Communication Type Target Data Types
O
(1)
, I
(1)
, B, N, L
(1) Output and input data types are not valid local data types for read messages.
<---> read/write 485CIF
T <---> read/write 485CIF
C <---> read/write 485CIF
R <---> read/write 485CIF
ST <---> read/write 485CIF
efesotomasyon.com - Allen Bradley,Rockwell,plc,servo,drive
To Next Page
Loading...
