Publication 1766-RM001A-EN-P - October 2008
Communications Instructions 459
4. Note that the “Sub Quality” will be “Bad” until an unsolicited
message is received:
4. Configure the ML1400 MSG instruction
ML1400 Channel 1 Network Link ID must be matched with the
DDE/OPC Topic Remote ID configured in step #2 (0, in this
example). Also configure a Remote Ethernet MSG in the ML1400 to
Remote Station Address 63 and Remote Link ID 15:
efesotomasyon.com - Allen Bradley,Rockwell,plc,servo,drive
To Next Page
Loading...
