Publication 1766-RM001A-EN-P - October 2008
System Status File 555
Forces Enabled
This bit is always set (1) by the controller to indicate that forces are
enabled.
Forces Installed
This bit is set (1) by the controller to indicate that 1 or more inputs or
outputs are forced. When this bit is clear, a force condition is not present
within the controller.
Address Data Format Range Type User Program Access
S:1/5 binary 1 status read only
Address Data Format Range Type User Program Access
S:1/6 binary 0 or 1 status read only
efesotomasyon.com - Allen Bradley,Rockwell,plc,servo,drive
To Next Page
Loading...
