Publication 1766-RM001A-EN-P - October 2008
Knowledgebase Quick Starts 649
The example above messages the SLC 500 Date and Time data (S:37 -
S:42)to the MicroLogix 1400 RTC, each time the SLC processor is powered
up and placed into the RUN mode or each time the Time Synchronization
Bit (B3:0/0) is enabled.
ATTENTION
!
Valid years for the Micrologix 1400 begin with 1998. Any date/time/year
values, prior to 1998, that are sent to a Micrologix controller will generate
a MSG Error Code 10h.
efesotomasyon.com - Allen Bradley,Rockwell,plc,servo,drive
To Next Page
Loading...
