Allworx Verge IP Phone Series User Guide
866.ALLWORX * +1 585 421 3850 Page 47
www.allworx.com
Version: D Revised: June 1, 2017
2. Press one the following keypad buttons and follow the audio prompts.
Key Option
1
Listen to voicemail messages. See “To manage voicemail messages:” on page 48 for more
options.
2
Listen to saved voicemail messages. See “To manage voicemail messages:” on page 48 for
more options.
3
Send a message.
• Enter the extension or alias to send the message. The Allworx system plays the selected
user’s number and name, and then prompts for another extension.
• Record a message, and then press the # key when complete.
• Select one of the following options:
4
Change your Message Center system settings. See “To update the Audio Message Center
settings:” on page 49 for more options.
7
Access an outside line (if enabled).
Dial the external phone number directly. It is NOT necessary to dial 9 or 78+PIN before the
phone number.
After connecting to an external call and the external party hangs up, users hear a dial tone to
place additional calls. Additional options include:
9
To manage system recordings (requires Recording Manager permissions). See “To manage
the Call Queues/ACD Queues recordings and schedules:” on page 51 for more options.
hang up
End the call.
#
Return to the previous menu.
*
Replay the menu options.
Key Option Key Option
1 or hang up
Send the message
#
Cancel the message
2
Review the message
*
Hear these options again
3
Change the message
Key Option
*# Disconnects (hangs up) the call and returns to the dial tone.
*# <Allworx PIN> # Returns to the Audio Message Center from the dial tone.
NOTE: The ability to hang up a call and return to a dial tone using *# is not available for
certain combinations of originating phones and outside lines. Contact the Allworx
administrator for more information.
To Next Page
Loading...