EasyManua.ls Logo

Amazone DMC 6000-2C - Page 101

Amazone DMC 6000-2C
162 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Coupling and uncoupling the machine
Primera
BAG0175.3 07.18
101
WARNING
Risk of contusions, cutting, catching, drawing in and knocks
when the machine unexpectedly releases from the tractor.
Use the intended equipment to connect the tractor and the ma-
chine in the proper way.
When coupling the machine to the tractor's three-point hydraulic
system, ensure that the attachment categories of the tractor and
the machine are the same.
Be sure to upgrade the machine's category. II upper and lower
link pins to category. III if your tractor has a category III three-
point linkage.
Only use the upper and lower link pins provided to couple up the
machine.
Check the upper and lower link pins for visible defects whenever
the machine is coupled. Replace the upper and lower link pins in
the event of clearly visible wear.
Secure the upper link pin and lower link pin in the connecting
points of the three-point attachment frame against unintentional
detachment using a linchpin.
Perform a visual inspection to ensure that the upper and lower
link hooks are correctly locked before driving off.
WARNING
Danger of breaking during operation, insufficient stability and
insufficient tractor steering and braking power on improper use
of the tractor!
You may only connect the machine to tractors suitable for the pur-
pose. For this, see the chapter "Checking the suitability of the trac
tor",
page 90.
WARNING
Risk of energy supply failure between the tractor and the ma-
chine through damaged power lines!
During coupling, check the course of the power lines. The power lines
must give slightly without tension, bending or rubbing on all
movements of the connected machine.
may not scour other parts.
Uncoupling the tractor lower link:
Risk of crushing while uncoupling!
Before uncoupling the implement, relieve the lower links and unlock
and uncouple the lower link hooks from the tractor seat!
When uncoupling the implement, there must always be enough free
space in front of the implement that the tractor can be aligned with the
implement again during recoupling.

Table of Contents

Related product manuals