Cleaning, maintenance and repairs
BAG0175.3 07.18
12.1 Cleaning
• Pay particular attention to the brake, air and hydraulic hose
lines.
• Never treat brake, air and hydraulic hose lines with petrol, ben-
zene, petroleum or mineral oils.
• After cleaning, grease the machine, in particular after cleaning
with a high pressure cleaner / steam jet or liposoluble agents.
• Observe the statutory requirement for the handling and removal
of cleaning agents.
Cleaning with a pressure washer / steam jet
• Always observe the following points when using a high pressure
cleaner / steam jet for cleaning:
ο Do not clean any electrical components.
ο Do not clean any chromed components.
ο Never aim the cleaning jet from the nozzle of the high pres-
sure cleaner / steam jet directly on lubrication and bearing
points.
ο Always maintain a minimum jet distance of 300 mm be-
tween the high pressure cleaning or steam jet cleaning
nozzle and the machine.
ο Comply with safety regulations when working with high
pressure cleaners.
To Next Page
Loading...
