BAG0175.3 07.18
10.3 Sowing operation
See the operating manual for the on-board computer.
Align the implement horizontally:
• Using the tractor lower link.
• If necessary, adjust the height of the coupling device.
Fig. 108
WARNING
Excessive wear of the coulter suspension when the stone
release is under constant strain can lead to failure of the
implement!
• The stone release may only react to occasionally occurring ob-
stacles on individual coulters.
• If the stone release is constantly reacting on all coulters:
ο Reduce the speed,
ο Reduce the placement depth,
ο Before seeding: Till the soil to a sufficient depth.
During seeding
• Keep the stop tap (Fig. 90) in Position B,
• Put the yellow tractor control unit into float position!
→ The coulters can deflect on obstacles in the soil.
→ The exact following harrow can adapt to the soil conditions.
→ The coulters and exact following harrow can be lifted at the
headlands using the yellow control unit.
• Check if all components are in the working position.
• Check the seed and fertiliser lines.
To Next Page
