General Safety Instructions
BAG0175.3 07.18
2.16.7 Tyres
• Repair work on tyres and wheels may only be carried out by
specialists with suitable installation tools.
• Check the air pressure at regular intervals.
• Observe the specified air pressure. If the air pres
is too high, then there is a risk of explosions.
• Park the machine in a safe place and lock the machine against
unintentional falling and rolling away (parking brake, wheel
chocks), before carrying out work on the tyres.
• Tighten or retighten all the fixing screws and nuts in accordance
with the specifications of AMAZONEN-WERKE.
2.16.8 Operation of the seed drill
• Comply with the permitted filling volumes of the seed hopper
(seed hopper content).
• When filling the seed hopper, only use the ladder and the plat-
form.
It is forbidden to ride on the machine during operation.
• During the calibration test, note the danger points from rotating
and oscillating machine parts.
• Before transportation, remove the thrust collars of the tramline
marker.
• Do not place any parts in the seed hopper.
• Before transportation, lock the track marker (construction-
dependent) in the transport position.
2.16.9 Cleaning, maintenance and repairs
• Only carry out cleaning, maintenance and repair work on the
machine when:
ο The drive is switched off
ο The tractor engine is at a standstill
ο The ignition key has been removed
ο The machine connector has been removed from the on-
board computer
• Regularly check the nuts and bolts for a firm seat and retighten
them as necessary.
• If the machine or parts of the machine are raised, secure them
against unintentional lowering before cleaning, maintaining or
repairing the machine.
• When replacing work tools with blades, use suitable tools and
gloves.
• Dispose of oils, greases and filters in the appropriate way.
• Disconnect the cable to the tractor generator and battery, before
carrying out electrical welding work on the tractor and on at-
tached machines.
• Spare parts must meet at least the specified technical require-
ments of AMAZONEN-WERKE. This is ensured through the use
of genuine AMAZONE spare parts.
To Next Page
Loading...