Amazone DMC 6000-2C - ISOBUS Control Terminal; Twin Terminal (Optional)

Structure and function
Primera
BAG0175.3 07.18
75
5.19 ISOBUS control terminal
To operate the implement, it is absolutely imperative to pay attention
to the operating manual for the control terminal and the operating
manual for the software!
The implement can be connected to any ISOBUS-compatible control
terminal. If the tractor has an ISOBUS system, the AMAZONE job
computer can also be connected to the existing ISOBUS socket of the
tractor and operated with the on-board terminal.
An ISOBUS-compatible control terminal makes it
easy to control, operate and monitor the imple-
ment.
Fig.
50
5.20 Twin Terminal (optional)
The communication with the ISOBUS-compatible
control terminal in the tractor cab takes place
through the TwinTerminal (optional). The Twin-
Terminal is located in the metering area and
saves the tractor driver the walk over to the trac-
tor cab, e.g. when starting the calibration proce-
dure or entering the collected calibrated quantity.
For a more detailed description, refer to the
"ISOBUS Software" operating manual.
Fig.
51