Amazone DMC 6000-2C - Adjusting the Placement Depth of the Seed; Adjusting the Double Rollers

Settings
Primera
BAG0175.3 07.18
113
8.5 Adjusting the placement depth of the seed
The placement depth can be set centrally for
each coulter group via the crank (Fig. 103/1).
The setting scale (Fig. 103/2) makes it possible
to evenly adjust all coulter groups to each other.
The arrow (Fig. 103/3) indicates the read-off
edge.
• Values from 0 to 5 can be set.
• The values do not indicate the placement
depth in cm.
• The set placement depth varies strongly
depending on the soil.
• Check the actual placement depth shortly
after starting work and occasionally during
operation
Fig.
93
8.6 Adjusting the double rollers
In addition to controlling the depth of the chisels,
d
ouble rollers are also responsible for closing the
sowing slot.
Double rollers can be adapted to the ground
conditions by adjusting the setting angle between
0° and 32°.
• Set a larger angle for direct sowing.
• Set a smaller angle for mulch sowing.
Fig.
94
Adjusting the double rollers
1. Undo both screw unions (Fig. 104/1) on a
roller.
2. Swivel the roller to the desired angle.
3. Retighten both screw unions.
4. Repeat the operation on the second roller.