Amazone DMC 6000-2C - Machines Without Their Own Brake System

Commissioning
98
Primera BAG0175.3
07.18
Calculate the actual D
C
value for the combination to be coupled
The actual D
C
value of a combination to be coupled is calculated as
follows:
D
C
= g x
T x C
T + C
Fig. 80
T:
permissible total weight of your tractor in [t] (See tractor operat-
ing manual or vehicle documentation)
C:
axle load of the implement [t] loaded with the permissible mass
without drawbar load (working load).
g:
Gravity (9.81 m/s²)
6.1.3 Machines without their own brake system
WARNING
Risk of contusions, cuts, dragging, catching or knocks from
insufficient tractor brake power.
The tractor must achieve the brake delay specified by the tractor
manufacturer, even with the machine connected.
If the machine does not possess its own brake system:
• Then the actual tractor weight must be greater than or equal to
(≥) the actual weight of the connected machines.
In many countries, other regulations apply. In Russia, for exam-
ple, the weight of the tractor must be double that of the attached
machine.
• The maximum movement speed is 25 km/h.