Amazone DMC 6000-2C - Service Plan - Overview

Cleaning, maintenance and repairs
136
Primera BAG0175.3
07.18
12.3 Service plan – overview
•
Carry out maintenance work when the first interval is
reached.
•
The times, continuous services or maintenance intervals of
any third party documentation shall have priority.
Before each start-up
1. Check hoses/tubes and connection pieces for any visually obvi-
ous defects/leaking connections.
2. Repair any areas of chafing on pipes and hoses.
3. Immediately replace worn or damaged hoses and pipes.
4. Immediately repair leaking connections.
After the first working run
Component
Maintenance work
see page
Specialist workshop
Wheels
•
Wheel nut check
• Check for play in the
wheel hub bearing
146
X
Fehler!
T
extmarke
nicht
definiert.
Hydraulic system
• Check for defects
• Check for leak tightness
136
On a daily basis
Component Maintenance work
see
page
Specialist workshop
Whole implement
•
Check for visible defects
Air reservoir
• Drain
141
Weekly / every 50 working hours
Component Maintenance work
see
page
Specialist workshop
Hydraulic system
• Check for defects
136
X
Wheels
• Check the air pressure.
146
Coupling device
• Check for damage, de-
formation and cracks
145