Amazone DMC 6000-2C - Cleaning the Distributor Head (Workshop)

Cleaning, maintenance and repairs
132
Primera BAG0175.3
07.18
12.1.1 Cleaning the distributor head (workshop)
Clean distributor heads which have been soiled by residual seed
immediately. Deposits of dirt on the distributor heads could in-
fluence the sowing rate.
Clean the distributor head:
1. Bring the machine to a stop.
2. Fold out the machine (see Seite 122).
3. Apply the handbrake, switch the tractor engine off and remove
the ignition key.
WARNING
The distributor head is located at the centre of the machine.
Apply the handbrake, switch the tractor engine off and remove
the ignition key.
Before approaching, clean the path to the distributor head and
the area of the distributor head (danger of slippage).
There is the risk of an accident on the path to the distributor
head and in the area of the distributor head.
4. Slacken the winged nuts (1) and remove
the clean plastic flap (2) from the distributor
head.
5. Remove any impurities with a brush, and
wipe out the distributor head and plastic cap
with a dry cloth.
6. Install the plastic cap (2).
7. Fix the plastic cap with winged nuts (1).
Fig.
113