Amazone DMC 6000-2C - Emptying the Dosing Unit or Hopper and Dosing Unit

Use of the machine
126
Primera BAG0175.3
07.18
10.5 Emptying the dosing unit or hopper and dosing unit
Empty and carefully clean the fertiliser hopper daily after work! Re-
maining fertiliser can damage the metering unit.
Seed residues left in the metering unit can swell or germinate if the
metering unit is not completely emptied!
This can cause blocking to the rotation of the metering wheels and
damage to the drive!
Emptying the dosing unit or hopper and dosing
unit:
1. Fasten the calibration trough(s) under the
dosing unit(s).
ο Calibration trough under the seed dos-
ing unit.
Fig.
109
Fig.
110
ο Calibration trough under the fertiliser
dosing unit.
2. Close the slide (Fig. 120/1), if only the dos-
ing unit and not the hopper is to be emptied
(see Seite 107 ).
Fig.
111