Primera BAG0175.3
5.21.1.2 Tramline rhythm 4, 6 and 8
Figure (Fig. 68) shows examples for creating tramlines with tramline
rhythms 4, 6 and 8.
It shows work with the seed drill at half width (partial width) during the
first field trip.
During work with partial width switched off, the drive of the appropri-
ate dosing roller is interrupted. For an exact description, see the on-
board computer operating manual.
Another option for creating tramlines with the tramline
rhythm 4, 6 and 8 is to begin with the full working width and the crea-
tion of a tramline (see Fig. 69).
In this case, the care machine works at half working width during the
first field run.
After the first field run, reset the full machine working width.
Fig. 57