Assembly and function
112
UF 01 DB 238. 07.04
4.10.2.4 Folding the sprayer booms in or out
Warning!
x When folding in and out the sprayer booms, implicitly ob-
serve the hints in the preface for chapter "Sprayer boom"
on page 95.
Hint!
x The booms do not always fold down symmetrically.
x The hydraulic rams used for the boom folding keep the
boom in its corresponding final position (either in transport
or working position).
Folding out the sprayer boom
The folded boom package is in the locked transport position
1. Unlock the transport securing device. Please refer to chapter
"Unlocking and locking the transport securing", page 110.
2. Actuate the functional field
until the individual segments of
both boom sides are folded out completely.
→ The sprayer booms are in operational position.
3. Actuate the functional field
.
→ The swing compensation unlocks. For this please also refer to
chapter "Unlocking and locking the swing compensation", page
111.
4. Adjust the spraying height according to the spray rate chart via
the functional field
or .
Folding in the sprayer boom
1. Actuate the functional field
until the sprayer boom has
been lifted to the medium height position.
2. Actuate the functional field once
and hydraulic boom tilting
aligns the sprayer boom horizontally (0-Positon).
3. Actuate the functional field
until the closed lock symbol
appears in the Menu operation.
→ The swing compensation locks.
4. Actuate the functional field
until the individual segments of
both boom sides have been folded out completely.
5. Lock the transport securing. Please refer to chapter "Unlocking
and locking the transport securing", page 110.
To Next Page