Special options
UF 01 DB 238. 07.04
145
5.10 Distance-Control
Hint!
x The control element Distance-Control can be operated with
the Super-S-boom only in conjunction with Profi-folding "0,
I, II and III.
Important!
x Before starting to operate the Distance-Control carefully
read and adhere to the attached instruction manual.
x Switch off
before carrying out any main-
tenance work.
The sprayer boom control element Distance-Control maintains the
sprayer booms automatically parallel in the desired distance towards
the area to be treated.
Two ultrasound sensors measure the distance towards the ground or
the crop. At an one sided deviation from the desired height Distance-
Control accesses the tilt adjustment for the height adaptation. When
the terrain rises to both sides, the height adjustment lifts the entire
sprayer boom.
When switching off the sprayer boom at the head lands the sprayer
boom is automatically lifted by approx. 50 cm. When switching on, the
sprayer booms lower to the calibrated height.
5.10.1 Calibration of Distance-control
Hint!
Pre-condition for the flawless functioning of the control element
Distance-Control is the correct calibration of the tilt adjustment
(Calibration of distance control).
Carry out a distance control calibration
x at the first operation.
x in case of deviations of the horizontal sprayer boom align-
ment shown in the display and the actual sprayer boom
alignment.
1. Recall via the functional field
the func-
tion "Calibration of tilt adjustment".
→ The menu "calibration distance control"
appears.
Fig. 164
To Next Page