General safety advice
16
UF 01 DB 238. 07.04
2.7 Informal safety measures
Besides the safety advice in this instruction manual observe and ad-
here to the national, local and generally valid advice for operational
safety, accident prevention and environmental care.
Please particularly observe the accident prevention prescriptions of
your national authorised trade aassotiation.
Ensure that all safety and danger hints on the machine are clearly
readable. If necessary replace damaged safety and danger hints.
2.8 Training of the staff
Only people who are trained and familiarised may operate with/on the
machine. The responsibility of persons for operation and maintenance
should clearly be prescribed. A trainee may only operate the machine
under the supervision of a skilled person.
Personnel
Particularly
trained persons
Instructed op-
erator
Persons with specialist
training
(Mechanics/electrical
engineering)
Action
Transport X X X
Putting into operation -- X --
Installation, setting up -- -- X
Operation -- X --
Maintenance -- -- X
Searching for faults and remedy X -- X
Disposal X -- --
Legend: X..allowed
--..not allowed
2.9 Safety measures and normal operation
Operate the machine only with all safety devices and guards properly
functioning.
Check the machine at least once a day for externally recognisable
damage and for function of the safety devices and guards.
2.10 Danger from residual power
Observe the incidence of mechanic, hydraulic, pneumatic, and elec-
tric/electronic residual power on the machine. Undertake appropriate
measures when instructing the operating staff. Detailed hints are
again given in the relevant chapters of this instruction manual.
To Next Page