Assembly and function
46
UF 01 DB 238. 07.04
4.4.3 Self cleaning pressure filter
The self cleaning pressure filter (Fig. 17/1)
•
prevents the blockage of the nozzle filters in
front of the spraying nozzles.
• has a larger number of meshes per inch
than the suction filter.
When the agitation is switched on the inner sur-
face of the pressure filter insert is continuously
flushed and not diluted spray agent or dirt parti-
cles are sent back into the spray cocktail tank.
Fig. 17
Overview Pressure filter insert
• Pressure filter insert with 50 mesh/inch (standard),
for nozzle size ’03’ and larger
Filter surface: 216 mm²
Mesh width: 0.35 mm
Order No.: ZF 150
• Pressure filter insert with 80 mesh/inch,
for nozzle size '02'
Filter surface: 216 mm²
Mesh width: 0.20 mm
Order No.: ZF 151
• Pressure filter insert with 100 mesh/inch
for nozzle size '015' and smaller
Filter surface: 216 mm²
Mesh width: 0.15 mm
Order No.: ZF 152
1
To Next Page