Amazone UF 01 - Enter the Impulses Per PTO Shaft Rev; Storage of the Nominal PTO Shaft Speeds for Different Tractors

Assembly and function
68
UF 01 DB 238. 07.04
4.9.7.3.2 Enter the impulses per PTO shaft rev.
1. Recall via the functional field the en-
tering "Please enter impulses per rev. for
the PTO shaft".
2. Enter the impulses per PTO shaft rev., e.g.
3 impulses.
3. Actuate the functional field
.
Fig. 54
4.9.7.3.3 Storage of the nominal PTO shaft speeds for different tractors
1. Recall via the functional field the en-
tering "Please select tractor".
Fig. 55
2. Position the selection arrow (Fig. 56/1) with
the aid of the keys
or in
front of the desired tractor.
3. Recall via the functional field
the input
"Please enter nominal PTO shaft rev.
speed".
4. Enter the nominal PTO shaft rev. speed for
the selected tractor, e.g. 540 R.P.M. Enter
for the nominal PTO shaft rev. speed the
value "0" when
• no PTO shaft rev. speed sensor exists.
• the rev. speed monitoring is not wanted.
Please refer to chapter "Entering of text and
figures", page 59.
5. Actuate the functional field
.
Fig. 56
Hint!
Via the functional field
you can
change the tractor name for the
selected tractor.
1