Amazone UF 01 - Storage of the Alarm Limit for the Nominal PTO Shaft Rev. Speed

Assembly and function
70
UF 01 DB 238. 07.04
4.9.7.3.5 Storage of the alarm limit for the nominal PTO shaft rev. speed
Hint!
An alarm signal sounds during spraying operation when the ac-
tual PTO shaft rev. exceeds or falls short the entered nominal
PTO shaft rev. speed.
1. Recall via the functional field the input
"Please enter the max. deviation from the
upper alarm of the PTO shaft".
2. Enter the max. permissible deviation from
the nominal PTO shaft rev. speed, e.g. + 10
% (max. permissible PTO-speed: 540
R.P.M. + 10% = 594 R.P.M.).
3. Actuate the functional field
.
4. Repeat the steps 1 to 3 for the functional
field
, e.g. - 25% (min. permissible
PTO shaft rev. speed: 540 R.P.M. - 25% =
405 R.P.M.).
Fig. 59