Amazone UF 01 - Calculation of the Minimum Ballast Front G; Calculation of the Actual Front Axle Load T; Calculation of the Actual Total Weight of the Combination Tractor;Mounted Implement; Tat

Putting into operation
UF 01 DB 238. 07.04
151
6.1.1.2 Calculation of the minimum ballast front G
V min
to ensure the steer ability
b
a
bTbTdcG
G
LVH
V
+
••+•−+•
=
2,0)(
min
Enter into the table the figure for the determined minimum ballast
weight G
V min
, which is required in the front of the tractor.
6.1.1.3 Calculation of the actual front axle load T
V tat
b
dcGbTbaG
T
HVV
tat
V
)()( +•−•++•
=
Enter the figure for the calculated actual total front axle load and the
permissible front axle load indicated in the instruction manual for the
tractor into the table (chapter 6.1.1.7).
6.1.1.4 Calculation of the actual total weight of the combination tractor/mounted implement
HLVtat
GTGG ++=
Enter the figure for the calculated actual total weight and the permis-
sible tractor total weight as indicated in the tractor-instruction manual
into the table (chapter 6.1.1.7).
6.1.1.5 Calculation of the actual rear axle load T
H tat
tatV
tat
tatH
TGT −=
Enter the figure for the actual rear axle load and the permissible trac-
tor rear axle load indicated in the tractor-instruction manual into the
table (chapter 6.1.1.7).
6.1.1.6 Tyre carrying capacity
Enter double the value (two tyres) of the tyre carrying capacity (please
refer e.g. to the documentation of the tyre manufacturer) into the table
(chapter 6.1.1.7).