Amazone UF 01 - Menu Operation

Assembly and function
84
UF 01 DB 238. 07.04
Important!
The actuation of the function Ter-
minal-Reset resets all data of the
terminal to the factory settings. No
machine data get lost.
Fig. 83
4.9.9 Menu operation
Hint!
Fig. 84 explains the meaning of the individual symbols in the
menu operation.
Speed
Spray pressure
Required spray rate (en-
tered spray rate)
Remaining distan
ce until
the spray cocktail tank
will be empty
Actually sprayed spray
rate
100% = Required spray
rate
1)
Worked area
(daily counter)
Manual operation or
automatic operation
PTO shaft rev. speed
Tilt adjustment
Actual spray cocktail tank
contents
Foam marker l.h.
switched on
Foam marker r.h.
switched on
off centre nozzle l.h.
switched on
off centre nozzle r.h.
switched on
Actual order Sprayer booms switched on
Boom part width section switched off
(no spraying cone, however nozzle)
Swing compensation
unlocked or locked
Fig. 84
Sprayer booms
• switched on (black
spraying cones)
• switched off (white
spraying cones)
1)
If during spraying operation you change the
spray rates via the keys
or
,
this symbol informs you about the selected
deviation from the required spray rate.