Cleaning, maintenance and repairs
-X BAG0235.4 01.23
• Clean machine with regular water jet (oiled implements only at
washbays with oil separators).
• Give particular attention to cleaning discharge openings and
sliders.
• Remove fertiliser deposits from the spreading discs and the
spreading vanes.
• When the machine is dry, apply a coat of anti-rust compound.
(Use only biodegradable compounds).
• Stow the machine with the sliders opened.
12.2 Lubrication instructions
Lubricate all the lubricating nipples (keep the seals clean).
Lubricants
For lubrication, use a lithium saponified, multipurpose grease with EP
additives:
Company
ARAL
FINA
ESSO
SHELL
PTO shaft
For winter operation, grease the protective tubes
to prevent them from freezing.
Also observe the installation and service instruc-
tions from the PTO shaft manufacturer, which
are fastened to the PTO shaft.
88
To Next Page