-X BAG0235.4 01.23
8 Adjustments
When performing any adjustment work on the machine, observe the
information in the following chapters
• "Warning pictograms and other labels on the machine" from
page 17 and
• "Safety information for the operator" from page 23.
Observing this information is important for your safety.
WARNING
Risk of contusions, cutting, catching, drawing in and knocks
through
Unintentional falling of the machine raised using the trac-
tor's three-point hydraulic system.
Unintentional falling of raised, unsecured machine parts.
Unintentional start-up and rolling of the tractor-machine
combination.
Secure the tractor and the machine against unintentional start-
rolling, before making adjustments to the machine. See Page 70.
WARNING
Risk of contusions, catching and knocks during all adjustment
work on the machine due to unintentional lowering of the cou-
pled and raised machine.
Secure the tractor cabin against entry of other persons to prevent
unintentional actuation of the tractor's hydraulic system.
Please note that the individual spreading properties of the spread
material have a significant influence on the lateral distribution and
spread rate. For this reason, the listed setting values should only be
considered as a reference.
The spreading properties depend on the following factors:
• The fluctuations in the physical data (specific weight, grain
size, frictional resistance
, cw value, etc.) within the same type
and brand
• The different properties of the spread material due to weather
factors and/or storage conditions.
As a result of this, we cannot guarantee that your spreading material,
even with the same name and from the same manufacturer, has the
same spreading properties as the listed spreading material. The spec-
ified setting recommendations for the lateral distribution are based
exclusively on the weight distribution and not on the nutrient distribu-
tion (this applies particularly for mixed fertilisers) or the active sub-
stance distribution (e.g., for slug pellets or lime). Claims for damages
not caused by the centrifugal spreader itself are excluded.