Amazone ZA-X - Structure and function

Structure and function
ZA
-X BAG0235.4 01.23
37
5 Structure and function
The following section provides information on the machine structure
and the functions of the individual components.
5.1 Function
The AMAZONE ZA-X fertiliser spreader is
equipped with two hopper tips and spreading
discs (1) that are driven from the inside out in
opposite directions and counter to the direction
of travel and
are equipped with one short (2) and
one long spreading vane (3).
Fig.
11
Fig.
12
The product slides down along the hopper walls
to the outlet opening (1). The agitator heads (2)
in the hopper tips can be dis
engaged and ensure
uniform fertiliser flow to the spreading discs.
The fertiliser is fed out along the spreading vane
and discharged by the spreading discs moving at
a speed of 720 rpm.
During this process, the drive rev. speed of the
PTO shaft is 540 rpm.
Use the setting chart to adjust the fertiliser
spreader to the fertiliser being distributed.
Fig.
13