Cleaning, maintenance and repairs
ZA-X BAG0235.4
12.12 Electric lighting system
WARNING
Replace defective bulbs immediately so that you do not pose a
hazard to other motorists and cyclists!
Replacement of light bulbs:
1. Unscrew the sight glass.
2. Remove the defective bulb.
3.
Insert the replacement bulb (ensure that the voltage and wattage
are correct).
4. Insert and screw on the sight glass.
12.13 Upper and lower link pins check
DANGER!
Risk of contusions, catching, and knocks when the implement
unexpectedly releases from the tractor!
Replace damaged top link pins and lower link pins immediately for
road traffic safety reasons.
Test criteria for top link pins and lower link pins:
• Visual check for cracks
• Visual check for fractures
• Visual check for permanent deformations
• Visual check and measurements for wear. The permissible wear
is 2 mm.
• Visual check for wear on the ball sleeves
• If applicable: check the fastening bolts for tightness
If a wear criterion is met, replace the top link pin or lower link pin.
To Next Page
Loading...
