General safety instructions
-X BAG0235.4 01.23
2.16.5 Fertiliser spreader operation
• Stay clear of the working area! Danger from flying fertiliser parti-
cles. Direct persons away from the throwing range of the fertilis-
er spreader. Do not walk or stand close to rotating spreading
discs.
•
Fill the fertiliser spreader only when the tractor engine is shut off,
the ignition key is pulled and the sliders are closed.
• Do not place any foreign objects in the hopper.
• While carrying out the spread rate check, beware of danger
points from rotating machine parts.
• Never unhitch a fertiliser spreader or roll it while it is full (tipping
hazard).
• For side spreading at field edges, bodies of water or roads, use
side spreading devices.
• Before each use, ensure that the attachment parts are properly
fitted, particularly those for attaching the spreading discs and
spreading vanes.
2.16.6 Cleaning, maintenance and repairs
• Only carry out cleaning, maintenance and repair work on the
machine when:
ο The drive is switched off
ο The tractor engine has come to a complete stop
ο The ignition key has been removed
ο The implement plug has been removed from the on-board
computer
• Regularly check the nuts and bolts for a firm seat and retighten
them as necessary.
• Secure the raise machine and/or raised machine parts against
unintentional falling, before cleaning, maintaining or repairing the
machine.
• When replacing work tools with blades, use suitable tools and
gloves.
• Dispose of oils, greases and filters in the appropriate way.
• Disconnect the cable to the tractor generator and battery, before
carrying out electrical welding work on the tractor and on at-
tached machines.
• Spare parts must meet at least the specified technical require-
ments of AMAZONEN-WERKE. This is ensured through the use
of original AMAZONE spare parts.
To Next Page