Amazone ZA-X - Boundary Spreading with Limiter X (Optional)

Adjustments
88
ZA-X BAG0235.4
01.23
8.5.1 Boundary spreading with limiter X (optional)
The Limiter X is used for left-side boundary spreading at half working
width.
The setting of the Limiter X depends on the edge distance, type of
fertiliser and whether boundary spreading or side spreading is being
used.
• Read the value to be set from the setting chart (Fig. 75).
• The border spread deflector can be put into or taken out of oper-
ation hydraulically.
The values of the setting chart are to be understood as guide num-
bers, as the fertiliser conditions may vary. Readjust the Limiter X if
necessary.
Excerpt from the setting chart
Name of the fertiliser
0,15 in
3.72 mm
0,04 lb/in
3
1, kg/ kg/l