Amazone ZA-X - Switching the Agitator Head on and off

Adjustments
ZA
-X BAG0235.4 01.23
95
8.6 Switching the agitator head on and off
To switch off the agitator head (Fig. 84/1), pull
out the lynch pin (Fig. 84/2) below the corre-
sponding hopper tip.
Fig.
84
WARNING
When switching on the agitator
head again, be absolutely certain
that the agitator head finger (Fig.
84/3), when moving in the direction
of rotation, does so ahead of the
short vane (Fig. 84/4).
Otherwise the clip pin does not lock
correctly in its end position.
Fit clip pin only as shown.