Amazone ZA-X - Boundary Spreading;Side Spreading

Structure and function
ZA
-X BAG0235.4 01.23
51
5.12 Boundary spreading/side spreading
Limiter X (optional)
Only for ZA-X 903 and ZA-X 1403.
If the first tramline is half the working width of the
field edge, you can carry out border spreading
via remote control using the Limiter X.
Fig. 38/...
(1) Border spread deflector
Locking block (optional)
For convenient operation of the Limiter X; pre-
vents unintentional lowering of the border spread
deflector when the tractor control unit is not tight-
ly sealed (separate double-acting control unit
required).
Fig.
38
Tele-Quick border spreading vanes
For left-side boundary spreading.
The Tele-Quick border spreading vane allows
spreading along field borders, as specified in the
fertiliser ordinance.
Fig.
39
Border spread deflector (optional)
If the first tramline is placed directly at the field
border, the border spread deflector (optional) can
be used for one-sided spreading at the field bor-
der.
Installing:
Fasten the frame member (Fig. 40/2) of the bor-
der spread deflector (Fig. 40/1) with the four
fastening screws (Fig. 40/3) on the roof plate of
the centrifugal broadcaster.
Fig.
40