ZA-X BAG0235.4
3 Loading and unloading
WARNING
Danger from crushing and / or impacts due to unintentional
dropping of the raised machine!
• It is essential to use the marked lashing points for securing load
supporting devices if you are loading or unloading the machine
with lifting gear.
• Use load supporting devices with a load bearing capacity of at
least 661 lb / 300 kg.
• Never enter the area below the raised machine.
Loading using a lifting crane:
There is one attachment point each at the front
and rear of the hopper (Fig. 5/1).
5
4 Product description
• Provides a comprehensive overview of the machine structure.
• Provides the names of the individual modules and controls.
Read this section when actually at the machine. This helps you to
understand the machine better.
To Next Page
Loading...
