Chapter 3 — Playback Operation 73
Load — Click to load an image from a diskette. Then you can
modify or print it.
To load an image from a diskette:
NOTE: Only load images that were created on an Intellex unit.
If you modify the image on a computer and want to
load it on the unit, save it in bitmap format with the
name IMAGE.BMP.
NOTE: If you make additional changes using the Image En-
hancement Tools, be sure to save the updated image
to a blank diskette.
1. Click Load. A message appears.
2. Insert the diskette with the image file into the diskette
drive.
3. Select one of the following options:
Yes — Load the image from the diskette. The unit dis-
plays the image in the image area. Use any of the enhance-
ment tools to modify the image.
No — Cancel the operation and return to the image en-
hancement screen.
Save — Click to save an image to a diskette. Then it can be
processed by a computer.
To save an image to a diskette:
NOTE: The name of the image on the diskette will be
IMAGE.BMP.
NOTE: You can only save one image at a time to a diskette.
1. Display and enhance the image, as required.
2. Click Save. A message appears.
3. Insert a blank diskette into the diskette drive.