PN 305200901, Rev YT
Safety Notes
WARNINGS, CAUTIONS, and NOTES contained in this manual emphasize critical
instructions as follows:
Important information that should not be overlooked.
An operating procedure which, if not strictly observed, may result in personal
injury or environmental contamination.
An operating procedure which, if not strictly observed, may result in damage
to the equipment.
Burn hazard. Hot surface. Do not touch, allow to cool before servicing.
Read this manual before beginning the installation and operation of the
3050-OLV Analyzer system. Failure to do so, and/or use of the equipment in a
manner not specied in this manual or accompanying documents, may impair
the protection against re, electrical shock and injury originally provided by
this equipment. In addition, failure to follow the installation and start-up
instructions may void the instrument warranty.
Electrical Safety
Up to 240 VAC may be present in the analyzer housings. Always shut down power
source(s) before performing maintenance or troubleshooting. Only a qualied electri-
cian should make electrical connections and ground checks.
Any use of the equipment in a manner not specied by the manufacturer may impair
the safety protection originally provided by the equipment.
Grounding
Instrument grounding is mandatory. Performance specications and safety protection
are void if instrument is operated from an improperly grounded power source.
Verify ground continuity of all equipment before applying power.
vi | 3050-OLV Moisture Analyzer
To Next Page
Loading...
