S412E PM PN: 10580-00319 Rev. N 1-1
Chapter 1 — General Information
1-1 About this Manual
This SCPI Programming Manual provides information for remote operation of the S412E
LMR Master using commands sent from an external controller through the Ethernet or USB
connection. This Programming Manual includes the following:
• An overview of the Ethernet and USB connection to the S412E
• An overview of Standard Commands for Programmable Instruments (SCPI) command
structure and conventions
• The IEEE common commands that are supported by the LMR Master
• A complete listing and description of all the SCPI commands that can be used to
remotely control functions of the LMR Master. These commands are organized by
instrument mode starting in Chapter 3.
This manual is intended to be used in conjunction with the LMR Master S412E User Guide.
Refer to that manual for general information about the LMR Master, including equipment
setup and operating instructions.
1-2 Introduction
This chapter provides a general description of remote programming setup, Ethernet or USB
connection, and cable requirements.
1-3 Contacting Anritsu
To contact Anritsu, please visit:
http://www.anritsu.com/contact-us
From here, you can select the latest sales, select service and support contact information in
your country or region, provide online feedback, complete a “Talk to Anritsu” form to have
your questions answered, or obtain other services offered by Anritsu.
Updated product information can be found on the Anritsu website:
Search for the product model number. The latest documentation is on the product page under
the Library tab.
Example URL for LMR Master S412E:
http://www.anritsu.com/en-US/test-measurement/products/s412e
To Next Page
Loading...
