3-6 :SYSTem Subsystem All Mode Commands
3-10 PN: 10580-00319 Rev. N S412E PM
3-6 :SYSTem Subsystem
This subsystem contains commands that affect instrument functionality. This functionality
does not directly relate to data collection, display, or transfer.
:SYSTem:MSIS[:STATe]? INTernal|USB
Title: Query Memory State
Description: Queries the ready state of the instrument’s internal memory or of the
USB Flash drive. Use this command to check the ready state of the
memory device before sending a command, such as :MMEMory:STORe
or :MMEMory:MSIS:COPY, that requires the memory location to be
available.
The USB query returns a 1 when a USB device is plugged into the USB
port. It returns 0 if no USB drive is present.
Internal memory in the LMR Master S412E should always be available
and the INT query should always return a 1.
Parameter: INTernal|USB
Parameter Type: <char>
Related Command: :MMEMory:MSIS
:MMEMory:MSIS:DESTination
:MMEMory:MSIS:COPY
:SYSTem:OPTions?
Title: Query Installed Options
Description: Returns a string of the installed options. Options are separated by a “/”.
The string returns “NONE” if no options are installed.
Cmd Parameter: NA (query only)
Query Response: NA (options are separated by “/” or “NONE”)
Related Command: *IDN?
:SYSTem:PRESet
Title: Preset
Description: This command restores all application parameters to their factory
preset values. This command does not modify system parameters such
as Ethernet configuration, language, volume, or brightness.
Note: After issuing this command, wait 30 seconds for the instrument
to complete the preset condition before sending another command.
Syntax: :SYSTem:PRESet
Cmd Parameter: NA
Query Response: NA (no query)
Related Command: *RST
Front Panel Access: Shift-1 (Preset), Preset
To Next Page
Loading...
