Anritsu LMR Master S412E - Chapter 9 - LTE Commands; 9-1:ABORt Subsystem; Chapter 9-LTE Commands

S412E PM PN: 10580-00319 Rev. N 9-1
Chapter 9 — LTE Commands
9-1 :ABORt Subsystem
The abort subsystem includes commands that allow the user to stop current measurement
activities on the instrument.
:ABORt
Title: Abort
Description: Restarts the current sweep and/or measurement. If
INITiate:CONTinuous is OFF
(i.e. the instrument is in single sweep mode), send the command
:INITiate[:IMMediate] to trigger the next sweep. If
:INITiate:CONTinuous is ON (i.e. the instrument is in continuous
sweep mode), a new sweep will start immediately.
Parameter: NA