Anritsu LMR Master S412E - 4-9:MMEMory Subsystem

4-9 :MMEMory Subsystem Spectrum Analyzer Commands
4-32 PN: 10580-00319 Rev. N S412E PM
4-9 :MMEMory Subsystem
The Mass Memory subsystem contains functions that provide access to the instrument’s
setup and data storage.
:MMEMory:LOAD:LIMit <file name>
Title: Recall Limit
Description: Recalls a previously stored limit from the current save location. The
saved limit setting to be loaded is specified by <file name>. <file name>
should be enclosed in either single quotes (‘ ’) or double quotes (“ ”) and
should contain a file extension “.lim”. Note that the trace specified by
<file name> should be available at the current save location. Use the
command MMEMory:MSIS to set the current save location. File
Extension: “.lim”
Parameter:<file name>
Example: To recall trace with file name “limit”
:MMEMory:LOAD:LIMit “limit.lim”
Related Command: :MMEMory:STORe:LIMit
Front Panel Access: Shift-7 (File), Recall
:MMEMory:LOAD:STATe <integer>,<file name>
Title: Recall Setup
Description: Recalls a previously stored instrument setup in the current save
location. The setup file to be loaded is specified by <file name>. <file
name> should be enclosed in either single quotes (‘ ’) or double quotes (“
”) and should contain a file extension “.stp”. Use the command
MMEMory:MSIS to set the current save location. The <integer>
parameter is not currently used, but it must be sent. Send a 1.
Parameter: <integer>, <file name>
Related Command: :MMEMory:STORe:STATe
:MMEMory:MSIS INTernal|USB
Front Panel Access: Shift-7 (File), Recall