All Mode Commands 3-4 :MMEMory Subsystem
S412E PM PN: 10580-00319 Rev. N 3-5
3-4 :MMEMory Subsystem
The Mass Memory subsystem contains functions that provide access to the instrument setup
and data storage.
:MMEMory:DATA? <file name>
Title: Transfer Data
Description: Transfers the data stored in the given file from the instrument to the
controlling program. Data is transferred in the form of
<header><block>. The ASCII <header> specifies the number of
data bytes. It appears as #AX, where A is the number of digits in X,
and X is the number of bytes in <block>.
<file name> should be enclosed in either single quotes (‘ ’) or double
quotes (“ ”) and should contain a file extension (.jpg, for example).
The file must not be larger than 524288 bytes. Use the command
:MMEMory:MSIS to set the current save location.
Cmd Parameter: NA (query only)
Query Response: <string> <file name>
Related Command: :MMEMory:MSIS INTernal|USB
Front Panel Access: NA
:MMEMory:DELete <file name>
Title: Delete Setup/Measurement
Description: Removes the measurement or setup file specified by <file name> from
the current mass storage device. <file name> should be enclosed in
either single quotes (‘ ’) or double quotes (“ ”). It should contain one of
the following file extensions:
File name extensions:
“.stp” for Setup
“.spa” for SPA measurement
“.mna” for VNA and VVM measurements
“.hipm” for HiPM measurements.
“.pm” for PM measurements.
“.cwsg” for CWSG measurements.
“.afp” for AM/FM/PM measurements
“.ia” for Interference Analysis measurements
“.cs” for Channel Scanner measurements
“.wmxd” for WiMAX
“.wmxe” for Mobile WiMAX
To Next Page
Loading...
