Spectrum Analyzer Commands 4-11 :TRACe Subsystem
S412E PM PN: 10580-00319 Rev. N 4-37
4-11 :TRACe Subsystem
This subsystem contains commands related to the transfer of trace data to and from the
instrument.
:TRACe:COPY TRACE1,TRACE2|TRACE3
Title: Trace Copy
Description: Copies Trace A to either Trace B or Trace C. Copying Trace A to Trace B
is equivalent to pressing the Shift-5 (Trace), Trace B Operations, A->B
on the front panel. This store Trace A into Trace B and turns on Trace B
if it was off. Copying Trace A to Trace C is equivalent to pressing the
Shift-5 (Trace), Trace C Operations, A->C on the front panel. This store
Trace A into Trace C and turns on Trace C if it was off.
Parameter: TRACE1,TRACE2|TRACE3
Parameter Type: <char>
Example: To copy Trace A to Trace B:
:TRACe:COPY TRACE1,TRACE2
To copy Trace A to Trace C:
:TRACe:COPY TRACE1,Trace3
:TRACe:EXCHange TRACE2,TRACE3
Title: Trace Exchange
Description: Swaps Trace B and Trace C.
Parameter: TRACE2,TRACE3
Parameter Type: <char>
Front Panel Access: Shift-5 (Trace), Trace B Operations, B<->C
Shift-5 (Trace), Trace C Operations, B<->C
To Next Page
Loading...
